+
  • 02b76fd2b95d393e62a5402aac4a82d8.png

Hot Dip Galvanized DP Steel

HC250/450DPD+Z, HC340/590DPD+Z, HC420/780DPD+Z, HC440/780DPD+Z, HC550/980DPD+Z, HC700/980DPD+Z
  • Commodity name: Hot Dip Galvanized DP Steel

Detailed

  • Product Description
  • Product Introduction:

    Microstructure: mainly martensite and ferrite. The martensite is distributed on the ferrite matrix as an island, and the ferrite is soft , so that the steel has better formability. The stiffer martensite gives steel higher strength. The strength increases with the proportion of hard martensite.

     

    Typical microstructure of dual-phase steel (martensite + ferrite)

    Performance characteristics: no yield platform, no room temperature aging, low yield ratio, high work hardening index and high baking hardening value.

     

    Application Case:

     

    Rear connecting plate for side panel sill reinforcement

    A-pillar inner plate

    Supply Standard:

    Can supply product according to European standard and other international standards, or according to the standards or requirements of users.

     
    Performance list for hot dip galvanized DP series steel
    GradeYield strength MpaTensile strength MpaElongation after fracture A50mm(%)n90Bake hardening value MPa
    HC250/450DPD+Z250–340≥450≥29≥0.16≥30
    HC340/590DPD+Z340–440≥590≥22≥0.14≥30
    HC420/780DPD+Z420–550≥780≥17-≥30
    HC440/780DPD+Z440–550≥780≥17One≥30
    HC550/980DPD+Z550–730≥980≥10-≥30
    HC700/980DPD+Z700–900≥980≥8-≥30

    a: When the yield phenomenon is not obvious, the prescribed plastic elongation strength RP0.2 is used instead, otherwise ReL is used.

    b: The sample is P6 sample in GB/T 228.1-2010, and the direction of the sample is longitudinal.

Keywords:

Hot-rolled, cold-rolled, hot-dip galvanized, silicon steel, steel pipes, steel structures

Get a quote

If you are interested in our products, please leave your email address to receive a free product quote. Thank you!

Submit Message

Related products